Install ADB with SDK
Make sure that the required drivers for your android device are properly installed on your PC. If you’re not sure then download and install the latest versions from your device manufacture’s website. Below are the links to download software of various manufacturers. Choose yours and install the required software.
Download and install the Android SDK (Software Development Kit) Starter package from http://developer.android.com/sdk/index.html.
An “android-sdk_rXX-windows.zip” file which you can extract to any place on your PC and the adb program will work from there. For easiness with commands, extract it to C:\
For adb to work on SDK Starter package we have to add Platform Tools part to the SDK. Below are the steps:
Open root directory of the SDK (for e.g. if you’ve installed or extracted it on then go to this address “c:\android-sdk-windows”
Find “SDK Manager” and double-click on it to execute.
It will check for updates on the Android website, and a pop up window will appear showing a list of available downloads. Just add the “Android SDK Platform Tools” and reject everything else
On your Android device go to Settings->Applications->Development and make sure that “USB Debugging” is ticked. It’s essential for ADB to work!
Now plug your phone into your PC (using original cable that’s supplied by your manufacturer is recommended when working with ADB). If a window pops up saying “installing drivers” then wait for it to complete installation
Open command prompt from the menus, or Open “Run > and type cmd” to execute Command Prompt and navigate to “c:\
Now insert the following code:
C:\> adb devices
This should display something like the following:
List of devices attached
If you can see your device in the list then congratulations! You’ve done well. You are now good to start using adb. Enjoy!
If it’s NOT appearing in the list make sure that drivers are properly installed and you’ve enabled “USB Debugging”
Toshiba Excite AT300SE Root
Rooting is done with the help of motochopper app done by (Dan Rosenberg) from XDA.
Do it with your own risk
Download the Android ABD driver for Toshiba site (Android WinUsb Driver).
Extract the zip file to C :\(after extract there will be folder C:\usb_driver),then connect the tab to PC or Laptop by putting it into USB Debugging.
Open device manager in the computer. Right-click the device name and Select Update Driver Software. This will launch the Hardware Update Wizard.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer
Click Have Disk, click Browse and specify the folder of C:\usb_driver
Click ok in the wizard.
Click Install this driver software anyway
After installing the drivers successfully .Download
and extract from the zip to desktop. Then open the motochopper folder
and click run.bat and then follow instruction.
If everything goes right there will be SuperSu app installed in the tab. As soon as you click on it automatic update the binary.
Connect the tab to internet for later update of SuperSu for Google Play store.
Unlocking or Debranding 4G Connect Wi-Fi Router
OTA Update will Undo all unlocking.Do it on your own risk
It better to put the router into factory default .
Step 1:- Check your firmware Version by browsing to IP of router (default 192.168.2.1).
If the version is above than 1.02.33, better downgrade to 1.02.33 and then to 1.02.32. (I find success in this way).Final we need older firmware version (1.02.32) to running in the Router.
The Zip file have two firmware 1.02.33(mr7015al-zz_r0b_FW_1.02.33(20120618)) and 1.02.32(mr7015al-zz_r0b_FWN_1.02.32(20120330))
Click on the Firmware Update->than browse file mr7015al-zz_r0b_FWN_1.02.32(20120330) ->update
This will reboot router. Now make sure that we running ver1.02.32
Step2:-Flashing the LTE module.
Click on the LTE Module Upgrade -> than browse file LTE_20120321_1K5QCI_4036_M0.02 ->update
This reboot the router again .Sometime routers will not response it around 2mins finish flashing.
Step3:- Click on the Adv.Setting -> Vendor Profile select->no profile unlock – MCC/MNC: 0/00
-> SIM Lock ->unselect
-> Check Firmware info time->2-3
This reboots the router again
Step4:- Click on the AT Command -> SIM Security ->Disable->submit
Step 5:- Click on the LTE/UMTS and make changes for your network setting (like APN or dial no.) ->Apply change
It should work fine….